SURFACE PREPARATION Roof and other surfaces must be thoroughly clean, dry, and free from moss, dirt, oil, grease, and loosely adhering materials. In the case of metal surfaces, remove rust and contamination and apply a coat of anti-corrosive primer. To achieve the best results, a fiber mesh reinforcing mat should be embedded into the first coat of BITUMAT SYNROOF whilst still wet mainly at expansion areas and joints with parapet. Depending on the nature of the substrate, a priming coat with BITUMAT SYNROOF diluted with 20% water may be required.

The Coverage area of approximately 250 sqft.

Coatings that can be applied on external walls exposed to weathering. These are UV resistant and come in colours grey and white.BITUMAT SYNROOF HI-BUILD, an elastomeric, premium quality acrylic coating, may be applied by brush, roller, squeegee or spray equipment depending on site conditions

usage places: external wall area

                                Gutters & Roof sheet joint