When mixed with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for repairing cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

Resists extreme hydrostatic pressure

Becomes an integral part of the substrate

Can seal static hairline cracks up to 0.5 mm

Can be applied to the positive or the negative side of the concrete surface

Allows concrete to breathe

Highlyresistant to aggressive chemicals

Non-toxic / noVOCs

Does not require a dry surface

Cannot puncture, tear or come apart at the seams

No costly surface priming or leveling prior to application

Does not require sealing, lapping and finishing of seams at corners, edges or between membranes

Does not require protection during backfilling or during placement of steel, wire mesh or other materials

Less costly to apply than most other methods

Not subject to deterioration

Permanent

Available in white for enhanced illumination

Packaging

Xypex Concentrate is available in 20 lb. (9.1 kg) pails, 60 lb. (27.2 kg) pails and 50 lb. (22.7 kg) bags.

Coverage

For normal surface conditions, the coverage rate for each Xypex coat is 6 to 7.2 sq. ft./lb. (1.25 - 1.5 lb./sq. yd. or 0.65 - 0.8 kg/m2).